Useful Life And Warranty Conditions; Scope Of Delivery; Intended Use - akrus ak 5003M Manual De Usuario

2

Useful life and warranty conditions

The useful product life is expected to be 8 years. Both, the useful life time and the warranty offered
by manufacturer are conditional upon the adherence to the conditions outlined below.
This declaration shall be rendered invalid if changes are made to the product without the manufac-
turer's authorization.
Caution
Risk of oper-
ating errors
Warning
Warning
General Haz-
ards
3

Scope of delivery

The ak 5003M scope of delivery comprises
Position
ak 5003M mammography chair
Power cord
Quality- test report
User Manual
Options according to order
4

Intended use

The medical device is intended for use as a surgical chair. Any other use of the product is not permit-
ted.
o The medical device is designed for a maximum patient weight of 150 kg (330 lbs) (EN 60601-
2-46 particular requirements for safety of operating tables). The headrest is designed for a
maximum load of 20 kg (44 lbs).
o The chair is suitable to be employed in the immediate proximity of patients.
297G001e.docx
The device may only be installed, operated, used and maintained by
persons who have been properly trained or who have the required
knowledge and experience to do so. Please also adhere to the nation-
al qualification guidelines applicable in your country.
The development, production and maintenance of these instrument
tables, together with associated risks, are based on an expected ser-
vice life of eight years, provided the device is serviced at the specified
intervals.
Modifications to the product or failure to follow the manufacturer's
instructions may substantially reduce the expected service life and
significantly increase the risks associated with the use of this device.
It is the responsibility of the institution operating this product to fol-
low the manufacturer's instructions and to decide on the risk/benefit
ratio upon expiration of the expected service life or maintenance and
inspection intervals specified by the manufacturer.
This device may only be set up, operated and used for the specified
purpose and according to national regulations, consistent with the
applicable industry standards and occupational safety and accident
prevention regulations. Further notes on classification are to be found
in chapter Technical data.
2019-04-15
Qty
1
1
1
1
Page 5 of 10