VETEC SPM 32 Instrucciones De Mantenimiento página 13

Safety and Maintenance Instructions
2.8. Transport
To protect your electric power tool against damage, make sure to clean it after every use. Store the tool in the transport case and
make sure the case is securely closed.
The electric power tool must be transported only in its closed transport case by physically fit persons.
2.9. Decommissioning/Disposal
The electric power tool's individual components must be disposed of separately.
The oil must first be drained and disposed of at special disposal areas. Hydraulic oils present a risk to
groundwater.
Uncontrolled draining and incorrect disposal are strictly prohibited
The battery must then be disposed of in accordance with the Battery Directive.
When disposing of the remaining parts of the electric power tool, please observe the environmental standards
in your country, or the regulations applicable in your region.
We recommend that the disposal be carried out by authorized specialist companies. If you need assistance, please contact our
technical service: This device falls within the scope of the European WEEE (2012/19/EU) and RoHS (2011/65/EU) directive. The
crossed-out waste bin symbol shown on this unit means that this product must be disposed of separately from household waste
after the end of its service life. It should either be handed over at a collection point for electrical and electronic waste equipment
or returned to the seller when purchasing a new device. In any case, the operator is responsible for the proper disposal of the
device after the end of its service life. It is only possible to process, recycle, and dispose of the product
in an environmentally friendly manner if the device is delivered to a suitable collection point so that, on the one hand,
components and materials are reused and, on the other hand, negative effects on the environment and health are avoided. For
more information, please contact your local waste disposal service or the sales outlet for this uni
2.10. Software
System The computer on which this software is installed must fulfill the following requirements
requirements
Operating system
CPU
RAM
Harddisk
Screen resolution
Other
Plug & Play After successful installation of the supplied software, the electric power tool will be recognized automatically
by your computer and you can update your programs or data.
A comprehensive installation guide is included on the supplied USB flash drive.
2.11. Warranty
Any defect in the product, which must be identified at the time of delivery, must be indicated to the manufacturer in writing
within 8 days from the date of delivery, including the transport document and a concrete description of the nature of the defects.
In the event of hidden defects, a complaint must be made within 8 days from the detection of the defect and before the end of
one year from receipt of the product. The manufacturer disclaims liability for any defects that are not brought to our attention
within the above-mentioned deadlines. The warranty does not cover damage resulting from improper handling, poor
maintenance, failure to use original spare parts, opening of the equipment by unauthorized personnel. In the event of repairs, the
warranty is only applied to the replaced parts; repairs will not lead to an extension of the warranty period for the entire product.
Windows 7, 8, 10
Processor with at least 1.7 GHz
1 GB or more
2 GB or more
1024 x 768 or higher,
USB 2.0
13