ivory Neo Line SL411E Instrucciones De Uso página 38

Idiomas disponibles

Fitting and removing the handpiece

ONLY use this contra-angle handpiece with type E micromotors (ISO 3964).

1) Push the handpiece on to the micromotor until it clicks into place. In the case of handpieces with optic fibre, turn the

handpiece until you hear a click, indicating correct alignment.

2) Check that the handpiece is securely connected to the micromotor.

3) Wait for the micromotor to stop before disconnecting the handpiece from it.

Eng

Tabla de Contenido