ivory Neo Line SL411E Instrucciones De Uso página 40

This could cause the handpiece to overheat, causing
damage or burns. Never exceed the maximum speed
specified by the bur manufacturer. Keep bur shafts clean
at all times; dirty shafts can cause dirt to enter the spindle,
leading to the bur slipping during rotation, or even
preventing the bur from fitting in the spindle correctly.
Never attempt to fit an instrument to a rotating micromotor.
DANGER!
Never apply excessive pressure to burs. They could break,
bend or become difficult to extract.
DANGER!
During use, avoid contact between the cheek tissues
and the button; the button may be pressed inadvertently
causing burn injury to the patient.
1) Press the locking button (1) and push the bur (2) in as far
as it will go. On blue and green contra-angle handpieces,
turn the bur until it locks in place.
38
Eng
2
WARNING!
When inserting a turbine, make sure it is inserted up to
the stop. Before insertion, make sure the shank of the
turbine is clean.
2) Check the tightness of the turbine (2).
2
3) Press the locking button (1) to release the bur (2).
1