Bluetooth Pairing - Timekettle M3 Manual

Bluetooth Pairing

1. The earbuds will automatically enter Bluetooth pairing
mode once removed from the charging case, with the
status indicator continuously flashing white.
2. Select "Timekettle M3" on the Bluetooth list of the
phone to build the connection by accepting the pairing
request.
①
*If the Bluetooth is not paired within 5 minutes,the
earbuds will automatically power off.
03
Settings
Bluetooth
MY DEVICES
Timekettle M3
O DEVICES
XXXX
XXXXXX
②
Reset
You may need to reset the earbuds if you experience
connection problems or functionality issues.
1. Put your earbuds in their charging case and wait for the
status indicator to turn in solid white.
2. Press the left and right earbuds three times separately
to access the reset mode, and the status indicator blinks
in alternating flashes of white and green three times to
indicate the completion of the reset.
3. Do not remove the earbuds from the charging case
during resetting.
4. If the reset is unsuccessful, it is recommended to try
again and make sure resets are done on both earbuds.
5. Resetting will erase the Bluetooth pairing history from
your device. To reconnect your earbuds to the device, first
Remove or Forget the earbuds from the device' s
Bluetooth memory.
04