Connecting The Cell Power Cable To The Power Center; Connecting The Power Supply Cable To The Ic15 Cell - Pentair INTELLICHLOR IC15 Guía De Instalación Y Usuario

Connecting the IntelliChlor IC20, IC40 IC60 SCG Cell Power Cable to the Power Center
After the cell installation is completed, connect InitelliChlor SCG cell's power cable to the Power Center:
WARNING - Switch OFF main system power to the Power Center before making any connections.
1. Be sure that AC power is switched OFF before connecting the power cord to the Power Center.
2. Align the four (4) pins of the cell power cord connector with the socket on the bottom of the Power
Center and insert the connector. Turn the round socket nut until it locks the connector in place.
Connecting the Power Supply Cable to the IC15 SCG Cell
WARNING - Switch OFF main system power to the Power Supply before making any connections.
After the IC15 cell installation is completed, connect the cell power cable to the Power Supply:
•
Align the four (4) pins of the cell power cord connector with the socket on the side of the Power
Supply and insert the connector. Turn the round socket nut until it locks the connector in place.
IntelliChlor SCG Power
Supply socket
IntelliChlor SCG IC15 Power Supply
®
IntelliChlor Salt Chlorine Generator Installation and User's Guide
Connector socket nut.
To cell assembly
23