Safety Notes - brennenstuhl ML CN 110 IP65 Manual De Instrucciones

Operating Instructions
D
Mobile Chip LED Light
Please note: Please read these instructions carefully prior to mounting the light and store them in
a safe location afterwards!
spECIfICaTIONs
Protection class I:
Protection class II:
Type of protection: IP65
Nominal voltage:
Model:
ML CN 110 IP65
ML CN 110 SK II IP65 10 W (1x10 W)
ML CN 120 IP65
ML CN 130 IP65
ML CN 130 SK II IP65 30 W (1x30 W)
ML CN 150 IP65
ML CN 180 IP65
The heavy-duty LED light is suitable for indoor and outdoor lighting applications. The mobile
chip LED light is wired ready for connection and comes with a connecting cable and a safety plug.
Note: The light is continuously horizontally adjustable within its pivoting range and can be locked
in position using the locking screws.

safETy NOTEs

1. Do not use this light without properly attached gaskets!
2. LED lights are extremely bright! Avoid looking straight into an LED light beam, as doing so
could result in irreversible eye damage.
3. Damaged protective covers must be replaced with an original Brennenstuhl protective cover
before the light can be used again.
4. If the mains supply cable of the device is damaged it must be replaced by a qualified technician
in order to avoid risks.
5. Make sure the light is attached firmly and securely. Make sure the cable is not crimped or
otherwise damaged.
4
ML CN 110 IP65, ML CN 120 IP65, ML CN 130 IP65, ML CN 150 IP65,
ML CN 180 IP65
ML CN 110 SK II IP65, ML CN 130 SK II IP65
220 – 240 V~ 50 Hz
110 V~ 50 Hz (ML CN 110 IP65 GB + ML CN 130 IP65 GB)
Output: Cable:
10 W (1x10 W) 2 m H05RN-F3G1,0
5 m H07RN-F2x1,0
20 W (1x20 W) 5 m H07RN-F3G1,0
30 W (1x30 W) 5 m H07RN-F3G1,0
5 m H07RN-F2x1,0
50 W (1x50 W) 5 m H07RN-F3G1,0
80 W (1x80 W) 5 m H07RN-F3G1,0
protective cover dimensions:
110.5 x 83 x 4 mm
110.5 x 83 x 4 mm
175 x 135 x 4 mm
220.5 x 180.5 x 4 mm
220.5 x 180.5 x 4 mm
281.5 x 231 x 4 mm
303.3 x 225.5 x 5 mm