Publicidad
Idiomas disponibles
Idiomas disponibles
Cod. 94717-94718-94719
Air filter
1. Remove the filter cover.
2. Wash the air filter in solvent.
3. lubricate the filter using motor oil
4. Thoroughly squeeze the filter removing excess oil
5. Reinstall the air filters.
WARNING:
The use of petrol or combustible solvents for cleaning can cause fire or explosion.
Therefore only use soap water or non-combustible solvent. Never operate the power
generator without the air filter.
SPARK PLUG
RECOMMENTED SPARK PLUG: F7TC
To ensure proper engine operation, the spark plug must be properly gapped and free of
deposits.
1. Remove the spark plug cap.
2. Clean any dirt from around the spark plug base.
3. Use the wrench to remove the spark plug.
4. Visually inspect the spark plug. Remove carbon deposits using a wire brush.
5. Check for discoloration on the top of the spark plug. The standard color should be a
tan color.
6. Check the spark plug gap. The acceptable gap should be between 0.6-0.7mm
7. Install /reinstall the spark plug carefully by hand
8. Once the spark plug has been seated tighten with the spark plug wrench.
9. Reinstall the spark plug cap on top of the spark plug.
Cleaning
1. Keep your machine clean, the outside of the machine can be cleaned using a
damp soft cloth with a mild detergent if required, never use water to clean the
generator as it may cause damage to internal parts.
2. Some maintenance products and solvents may damage the plastic parts, these
include products containing benzene. Trichloroethylene. Chloride and ammonia.
3. Use a vacuum to clean air inlet and outlet louvers of the alternator.
28
Publicidad
