Problem
Operating time is
short even after a full
charge.
Shaver does not
operate even after
charging.
28
Action
Although the shaver can be
used for about 2 weeks after
a full charge (assuming
dry‑shave usages for 3
minutes per day), the usable
number of days might be
lower depending on how the
shaver is used (for example,
when used for wet shaving).
Apply oil.
Clean the shaver.
When the number of
operations per charge starts
to decrease, the battery is
nearing the end of its life.
Use the appliance in an
ambient temperature
approximately 5 °C (41 °F)
or higher.
The battery has reached the
end of its life.
The shaver will not operate
with the AC adaptor
connected. Please use the
shaver after it has been
sufficiently charged and the
AC adaptor disconnected.
Problem
The driving sound
changes while
shaving.
Makes a loud sound.
The odor is getting
stronger.
System outer foil gets
hot.
Action
The shaving sensor is
operating. The sound
changes depending on the
beard thickness.
Apply oil.
The blades will not move
smoothly when there is no
oil on the system outer foil,
requiring more power.
The shaver makes a high‑
pitched sound due to the
linear motor drive. This does
not indicate a problem.
Confirm that the system outer
foil is properly attached.
Clean the system outer foil
with the brush. (See
page 20.)
Wash the system outer foil
with water. (See page 18.)
Clean the shaver.
Apply oil.
Replace the system outer
foil if it is damaged or
deformed.
(See page 20.)