Fein ABLS1.6E Instrucciones De Uso página 12

OBJ_BUCH-0000000132-001.book Page 12 Tuesday, June 18, 2013 7:46 AM
en
12
Setting the stroke rate (figure 5).
Set the required stroke rate according to the
material being worked.
The stroke rate can be preset in 6 steps with
the control knob for continuously variable
stroke adjustment.
Level 6: Steel and aluminum.
Level 1 – 6: Plastic.
Handling the battery.
Battery charge-control indicator (figure 6).
Operate and charge the battery only within
the battery operating-temperature range of
0 °C – 45°C (32°F – 113°F). At the begin-
ning of the charging procedure, the battery
temperature must be within the battery oper-
ating-temperature range.
Press the button to activate the LED indica-
tion.
LED indica- Meaning
tor
1 – 4 green Percentage
LED of charge
condition
Continuous Battery is
red light almost
empty
Red flashing Battery is
light not ready
for opera-
tion
The real percentage of the battery charge
condition is only indicated when the power
tool motor is stopped.
The electronics automatically switch off the
motor prior to the battery being deep dis-
charged.
Fig. 5
Fig. 6
Activity
Operation
Charge battery
Bring the battery
into the battery
operating-tem-
perature range,
then charge
Continuously variable
stroke adjustment
6
5
4
3
2
1