Fein ABLS1.6E Instrucciones De Uso página 13

OBJ_BUCH-0000000132-001.book Page 13 Tuesday, June 18, 2013 7:46 AM
Adjusting the cutter-blade clearance
(ABLS1.6E) (figure 7).
Loosen the screw.
Adjust the desired clearance between cutter
blades with the set screw.
Retighten the screw.
Material thickness Cutter-blade clearance
0.3 mm– 0.6 mm 0.1 mm
0.8 mm– 1.2 mm 0.2 mm
1.3 mm– 1.6 mm 0.3 mm
Set screw
Screw
1.
3.
Cutter blade
6.
5.
4.
7.
en
13
2.
8.