Publicidad
Idiomas disponibles
Idiomas disponibles
Explanation of switches,
buttons and jacks
1
Hz/%
SEL button
2
MAX/MIN
3
4
Input jack V/Ω
5
Earth jack COM
6
µA/mA jack
7
10 A jack
ON/OFF switch /
8
measurement function
selection switch
9
RAN
Hold/BL
0
REL/APO
q
w
Display
; Güldenwerther Bahnhofstraße 25 - 29 • 42857 Remscheid • GERMANY
[ +49 (0) 21 91 / 7 92-0 • \ +49 (0) 21 91 / 7 92-375 • ^ hazet.de • ] info@hazet.de
2
Operation
w
0
9
q
8
7
6
For switching between frequency measurement and duty cycle
Actuating the button switches the current measurement
function, e.g. From DC to AC
Depending on the function, actuation displays the maximum
value or the minimum value of the measurement.
Red test lead for all types of signals supported by the instrument.
Black test lead for all types of signals supported by the instrument.
For current measurements up to 600 mA.
The 10 A jack must be used for current measurements above 600 mA.
Switches the instrument on. The measurement function is
selected depending on the switch position.
Actuation of the button selects the measurement range manually.
Actuation of the button saves the measured value in the display.
Prolonged actuation of the button switches on the display lighting.
Actuation of the button activates relative measurement. Prolonged
actuation of the button switches the Auto Power-Off function on
and off.
For reading off the measured values.
Electrical energy may cause serious injuries!
Electrical energy may cause serious injuries!
HAZET-WERK Hermann Zerver GmbH & Co. KG
Always wear personal protective equipment!
Always wear personal protective equipment!
1
2
3
4
5
19
Publicidad
