Kit Assembly - Metra 95-8265HG Instrucciones De Instalación

1. Attach the radio brackets to the radio
housing trim panel using the
(4) #6 x 3/8" screws supplied. (Figure A)
2. Slide the radio into the assembly and
secure with the screws supplied with
the radio. (Figure B)
4. Locate the factory wiring harness and
antenna plug in the dash and make all
necessary wire connections to the radio.
Metra recommends using the proper
mating adapters from Metra and/
or AXXESS. Test the radio for
proper operation.
5. Mount the new radio assembly into
the dash.
6. Reassemble the dash in the reverse
order of disassembly.

KIT ASSEMBLY

(Figure A) (Figure B)
REV. 4/20/2022 INST95-8265HG
3