Configuration; Switching On / Off; Effacement; Reference Level - Chauvin Arnoux CA 1730 Manual De Instrucciones

3.1.SWITCHING ON / OFF

3.2.EFFACEMENT

3.3.REFERENCE LEVEL

Press the
back, or the ruler of the instrument. An audible beep indicates that the
reference has been changed.
As default, the reference level is on the back of the instrument. When
the instrument is switched on, the reference is automatically reset to the
default value (back of the instrument).

3.4. LIGHTING OF THE DISPLAY UNIT

Press the

3. CONFIGURATION

To switch the instrument on (by a long press), activate the
LASER, and make a measurement.
A long press on this key turns the instrument off. The
instrument switches itself off automatically after 3 minutes
of inactivity.
The last action is cancelled or the display of the value is
cleared.
key to toggle the reference point between the front, the
key to switch the backlighting on or off.
22