Except as otherwise stated, our warranty is valid for 24 months starting
from the date on which the equipment was sold. Extract from our General
Conditions of Sale provided on request.
The warranty does not apply in the following cases:
- Inappropriate use of the equipment or use with incompatible equipment;
- Modifications made to the equipment without the explicit permission
of the manufacturer's technical staff;
- Work done on the device by a person not approved by the manufacturer;
- Adaptation to a particular application not anticipated in the definition
of the equipment or not indicated in the user's manual;
- Damage caused by shocks, falls, or floods.
Except for the batteries, the instrument contains no parts that can be
replaced by personnel who have not been specially trained and accredited.
The manufacturer cannot be held liable for any accident that occurs
following a repair done by anyone other than its customer service department
or an approved repairer.
7.1.OPERATING PROBLEMS
Measurement errors may occur on semi-transparent materials, glass,
Plexiglas, or similar materials. In such cases applying a sheet of paper
will facilitate the measurement. Varnished surfaces can deflect the LASER
beam and also lead to measurement errors. The measurement time may
be increases in the case of non-reflecting surfaces.
Some errors are reported in the form of codes. The table below links the
error codes to possible solutions.
6. WARRANTY
7. MAINTENANCE
28