Publicidad
Idiomas disponibles
Idiomas disponibles
2. Enter the stone firing table.
Insert the stone with a slight upward inclination, from the bottom, until it fits inside the oven.
3. Connect the gas hose to the pizza oven.
Connect the gas hose to the inlet pipe and secure it using a metal clamp.
4. Connect the hose to the cylinder.
WARNING Always keep the cylinder in an upright position.
The size of the 9L cylinder is 31cm in diameter and 45.5cm high.
If you are not using the appliance, you must turn off the gas from the bottle.
The cylinder used must include a collar to protect the valve.
The minimum distance between the oven and the 9L cylinder is 1m.
B UTA N E G AS R EGU L ATO R
This type of regulator has a press fit.
Make sure the black switch is horizontal.
Squeeze the base and push the regulator
onto the cylinder valve until it clicks.
Pushing
through this hole you will lift
the stone to be able to remove
it more easily.
L P G AS REG U L ATO R
This regulator has a threaded coupling that
is adjusted by turning it counterclockwise.
Make sure the cylinder is completely off
and screw the regulator as far as possible
onto the cylinder valve.
with
your
finger,
E NGLI SH
9
Publicidad
