Publicidad
Idiomas disponibles
Idiomas disponibles
CAPACITANCE
1. Insert RED test lead into V jack
COM jack
4
Continuity/Resistance/Diode/Capacitance
NOTE: The meter defaults to Continuity testing in this mode. To
enter Capacitance testing mode, press the "SEL" button
times. "nF" or "µF" will appear on the display.
2. Remove power from circuit.
3. Measure capacitance by connecting test leads across the
capacitor. The meter will auto-range to display the measurement
in the most appropriate range.
FREQUENCY / DUTY-CYCLE
1. Insert RED test lead into V jack
COM jack
Frequency/Duty-Cycle
NOTE: The meter defaults to Frequency testing in this mode. To enter
Duty-Cycle testing mode, press the "SEL" button
that the appropriate icon (either Hz or % ) appears on the display.
2. Measure by connecting test leads across the circuit.
OPERATING INSTRUCTIONS
, and rotate function selector switch
Black lead
, and rotate function selector switch
4
Black lead
, and BLACK test lead into
5
Red lead
and BLACK test lead into
5
setting.
Red lead
to the
2
setting.
three
11
to the
2
once. Ensure
11
15
Publicidad
