Publicidad
Idiomas disponibles
Idiomas disponibles
7. GENERAL DESCRIPTION
The folding sides have been designed to be adapted to hospital beds, with a simple structure
to be positioned on the headboard and footboard.
7.1 View and parts list
MI190 - MI195
Fig. 1
8. ASSEMBLY
8.1 Assembly of the structure (MI190 - MI195)
Note:
The illustrations for assembly and adjustments refer to the Moretti hospital beds
MI100, MI110 and MI120. The illustrations refer to the hospital bed with two rotating handles.
The assembly and adjustment operations shown also apply for the hospital bed with one
rotating handle.
•
Unpack the product and check that the contents correspond with the illustrative
description of the parts
•
Assemble the bracket (2) on the frame of the bed using the screws (9) - 2 pieces, then
position and turn the bracket as shown in (Fig. 2). Repeat this operation for both sides
of the bed
Fig. 2
foot of the hospital bed
1. Lifting base frame with motor
drive
2. Attachment bracket at foot of bed
3. Attachment bracket at head of bed
4. Plastic stop for electrical
connections (only for MI195)
5. Power supply unit (only for MI195)
6. Remote control (only for MI195)
7. Hydraulic lifting pedal (solo MI190)
8. Screws for assembly of bracket
at head of bed
9. Screws for attachment of the
brackets onto the bed
10. Screws for attachment of the pedal
(only for MI190)
11. Pedal attachment nuts
Photograph for illustrative purposes
5
Publicidad
