• THE CHILD RESTRAINT SYSTEM MUST BE INSTALLED IN STRICT COMPLIANCE WITH THE INSTRUCTIONS
PROVIDED. FAILURE TO OBSERVE INSTRUCTIONS/WARNINGS CAN SERIOUSLY COMPROMISE YOUR CHILD'S
SAFETY.
• Before assembling, verify that the product and all its components have not been subject to damages during transport.
Should this be the case, do not use the product and keep it out of reach of children.
• For the safety of your child, remove and eliminate all plastic bags and elements belonging to the packaging before use
and, in any case, keep them out of reach of newborns and children.
• Do not use the product, unless all its components are properly fastened and adjusted.
• Do not use the product if any components are broken or missing.
• Assembly, disassembly and adjustment operations must be carried out only by adults. Make sure that the person using
the product (baby-sitter, grandparents, etc.) are aware of its correct operation.
• Do not insert your fingers inside the mechanisms.
• Do not use adapters other than those supplied with the product or in any case non approved by the Manufacturer.
• Remove the adapter when the child is more than 60 cm tall.
• Check if there are any special requirements related to the use of child restraint systems in the law in force in the country
you are in.
• Do not make any alterations or additions to the child car seat without the approval of the Type Approval Authority.
Unauthorized technical changes can cause the protective function of the child car seat to be reduced or completely
eliminated.
• The homologation will be invalidated if you make any modifications to the product.
• Do not remove the adhesive and sewn labels. The removal of these labels could result in the product not complying
with the law.
• Never use the child car seat without the lining and the shoulder pads. They cannot be replaced with others unapproved
by the manufacturer as they are an integral part of the child restraint system and are essential for safety purposes.
• Do not use the child car seat in positions or configurations other than those illustrated in this user manual.
• Do not install it in rearward-facing vehicle seats or in vehicle seats that are transversal with respect to the direction of
travel.
30
USE AND INSTALLATION