Publicidad
Idiomas disponibles
Idiomas disponibles
b Press the bayonet into the socket.
c Turn the extension tube 90° until it
clicks into place.
2. Tighten the union nut.
If necessary, repeat the process for ad-
ditional extension tubes.
Operation
Note
Extension tubes can be used with any
Kärcher accessory.
Note
For an optimal cleaning result, do not
operate the high-pressure cleaner in
the eco setting.
Cleaning the floor area
Before use, remove coarse dirt from
the cleaning surface (e.g. by sweeping
it away) in order to avoid damage to the
T-Racer.
ATTENTION
Damage to the rotor arm
The rotor arm can be damaged if it hits
edges and corners.
Do not drive over free-standing corners
and edges.
6
ATTENTION
Do not use the T-Racer for scouring or
scrubbing.
ATTENTION
First check the effectiveness of the de-
vice in an inconspicuous place, espe-
cially on sensitive surfaces such as
wood.
ATTENTION
Do not stay in one place, always keep
the T-Racer moving.
1. Attach the T-Racer to the high-pres-
sure gun with the extension tube.
a Completely unscrew the union
nut.
b Press the bayonet of the exten-
sion tube into the socket on the
high-pressure gun.
c Turn the extension tube 90° until it
clicks into place.
2. Tighten the union nut.
If necessary, repeat the process for
further connections.
3. Adjust the height adjustment of the
rotor arm according to the cleaning
surface.
4. Unlock the lever of the trigger gun.
5. Pull the lever of the trigger gun.
The device switches on.
English
Publicidad
