Ryobi RY36BI1800A Manual De Instrucciones página 9

Heat overload The inverter temperature is
Press reset out of the normal operating
range.
Hight temperature The product is nearing the
warning maximum high or minimum
or low operating temperature.
Low temperature
warning
Press reset
High temperature The product is outside
shutdown of the normal operating
or temperature range.
Low temperature
shutdown
Low voltage warning The battery packs do not
Press reset have suffi cient charge to
run the connected devices.
Low voltage shutdown The battery packs are
discharged.
System fault There is an internal
communication error.
Allow the product to cool down
and reach the normal operating
temperature.
Press the reset button to reset the
AC output.
Allow the product to cool down
or warm up as needed to an
acceptable temperature, then press
the AC output button to continue
operation.
Move the product to a cooler or
warmer area as needed, and allow
the product to reach the acceptable
operating temperature.
Disconnect some of the devices.
If condition persists, disconnect all
devices, and recharge the battery
packs.
Recharge the product. If issue
persists, replace the battery packs.
Visit www.ryobitools.eu.
Call an authorised service centre.
Original Instructions
EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK
TR
9