Publicidad
Idiomas disponibles
Idiomas disponibles
11.1
CONNECT THE WATER SUPPLY
TO THE MACHINE
For easy operation, please use a self-coiling garden hose (not
provided).
WARNING
When you operate the self-coiling hose, make sure that the
hose has no blockage.
WARNING
•
The water supply must come from the water main
•
Do not use hot water
•
Do not use water from ponds or lakes
WARNING
Always observe all the local regulations when you connect
the garden hose to the water supply. Direct connection
through a receiver tank or backflow preventer is usually
permitted.
CAUTION
Inspect the filter in the water inlet connector before you
connect the garden hose
•
If the filter is damaged, do not use the machine until the
filter is replaced.
•
If the filter is dirty, clean the filter.
17
1. Uncoil the garden hose (17).
2. Let the water flow through the garden hose (17) for 30
seconds.
3. Turn the water supply off.
4. Install and tighten the end of the garden hose (17) to the
water inlet (8) connector.
English
8
9
CAUTION
There must be a minimum of 10 feet of free hose between
the water inlet and the water supply.
11.2
USE THE SPRAY GUN
21
22
WARNING
For safe control, keep your hands on the spray gun at all
times.
•
Pull and hold the spray gun trigger (21) to start the
machine.
•
Release the spray gun trigger (21) to stop water flow
through the spray tip.
11.2.1 UNLOCK THE SPRAY GUN TRIGGER
•
Push the trigger safety lock-out (21) down until it clicks
into the slot.
11.2.2 LOCK THE SPRAY GUN TRIGGER
•
Push the trigger safety lock-out (21) up and into it's
original position.
11.3
CHANGE THE SPRAY TIP
18
①
②
③
Click
19
EN
Publicidad
Solución de problemas
