Cube AM / SLASHER Manual De Montaje página 7

IMPORTANT INFORMATION
– If you are not sure how to adjust the pins on the pedal, please contact your dealer.
– If you require further information about installation and set-up, please contact your dealer or local
bike shop.
The following tools are required for installation and maintenance
2
2 mm Allen key
mm
6
6 mm Allen key
mm
Pedal axle removal tool
(for Slasher pedals only)
12
TOOLS REQUIRED:
2-40
Torque wrench
nm
Protective glasses
Protective gloves
Pins TORQUE SPECS:
Axle: 30–40 Nm/22.1–29.5 lb ft
Pins: 2 Nm/1.47 lb ft
Axle
13