aqprox appLS12R Guia Del Usuario página 22

Note: When uploading data, please try to ensure the
wireless signal is well connected, or upload with USB
cable.
By scanning "Clear Data" to clear the barcode data
in storage, the cleared barcode will not be able to be
uploaded if it was cleared. Please confirm whether the
data has been uploaded before your clear.
Clear Data
Pair With Dongle
A. Switch on the scanner, scan "Enter Setting Mode"
barcode.
B. Scan "Dongle Mode" barcode.
C. Scan "Pair with dongle" barcode, it goes to pairing
status, the blue light flashes.
D. Plug in dongle, when you hear the sound "Di", it
pairs successfully, the blue light keep on.
E. Scan "Exit Setting Mode" barcode.
Note: If the dongle is in pairing state but fail to be
22