GB
03.
03.
93
93
02.
02.
00
00
Manual operation
3
Press the icon
4
Press the start button with the filter holder (10, Fig. 1) and keep it pressed for the desired time that
is shown on the display within a red light (see Fig. 5c). Once the start button is released, SweepOut
is activated for the set time.
Remove the filter holder only after the green light.
To disable manual mode, press the icon
Note: The display automatically goes into stand-by if it is not used for a minimum of 1 minute. This
time can be set, in minutes, in the parameter MIN.STANDBY (see Par. 7. MIN. STANDBY
page 60).
Fig. 5b
(manual mode) to enable it (see Fig. 5a) .
SINGLE
SHOT
01.
93
02.
00
00.
00.
00
00
00.
00.
00
00
again.
DOBLE
SHOT
04.
02.
00
MANUAL
MODE
00.
00
02.
00
43
93
Fig. 5a