Publicidad
Idiomas disponibles
Idiomas disponibles
6
Volt™ 6
Electric Fan Heater
Maintenance
WARNING
■ NEVER SERVICE THE HEATER WHILE IT IS
PLUGGED IN, RUNNING OR HOT. SEVERE
BODILY INJURY OR ELECTRIC SHOCK MAY
OCCUR.
■ ONLY QUALIFIED PERSONS ARE ALLOWED
TO OPEN HEATER FOR SERVICE.
NO USER-SERVICEABLE PARTS INSIDE.
■ Keep heater clean. Use pressurized air to blow
fan blades clean. Note! Use moderate pressure to
avoid damage to fan blades
■ Inspect heater before and after each use
■ The fan motor is sealed and has permanently
lubricated bearings
Wiring Diagram
C
Contactor
M
Fan Motor
R1/R2 Heating Element
S1
Toggle Switch
S2
Ambient Thermostat
Owner's Manual • Volt™ 6
Storage Instructions
When not in use, the heater must be disconnected
from power source, cleaned of dust and stored in a
dry place.
The power supply cord should be loosely wound
around the handle of the heater.
S3
Overheat Limit Switch (70°C)
S4
Overheat Limit Switch (50°C)
X1
Terminal Block
X2
Grounding Lug
X3
Power Cord & Plug
Publicidad
