Operating Mode - aqprox appLS10 Guia Del Usuario

Note: Scan above barcode to enter the bluetooth searching
state.

Operating Mode

In normal mode, the scans are uploaded directly to computer
via USB cable or WIFI dongle. If succeeds, barcode scanner
will make a low-frequency short tone. If it fails, there will be
three low frequency short tones to alarm. In normal mode, it
fails, tha data will be lost. You can scan below:
If the transfer range is beyond Bluetooth wireless transfer ran-
ge storage mode is suggested, in which scans are stored in
internal storage after being scanned.
In storage mode, if a barcode is scanned and the scanner will
make a short tone and scans are automatically stored in
scanner's internal storage.
If the internal storage is full, the scanner will emit three low-
frequency short tones to alarm.
By scan "Total amount of stored barcode" barcode, to check
the total amount of scanned barcodes in storage:
26
Bluetooth SPP mode
Bluetooth BLE mode
Normal mode
Storage mode