Gas Fry-Top With Valve Tap; Description Of The Controls; Gas Fry-Top With Thermostatic Valve - Fagor FT-G905 Instrucciones De Instalación, Uso Y Mantenimiento

It is essential that the chimney does not get blocked, even partially, for the correct
operation of the burners.
The steps required to optimise the operation of your Fry-Top are shown below, with all the available
options.
5.2.1

Gas fry-top with valve tap

5.2.1.1

Description of the controls

5.2.1.2 Burner ignition
•
Pilot ignition FT-G905 / FT-G910:
o
Turn control M anticlockwise to the position Pilot
o
Next press the spark generation button. The pilot will light automatically.
o
If the pilot does not light automatically, it is possible to light it manually through the ignition
pipe.
•
Pilot ignition FT-G705 / FT-G710:
o
Turn control M anticlockwise to the position Pilot
o
Next press the piezo button.
o
If the pilot does not light, it is possible to light it manually through the ignition pipe.
•
Burner ignition:
o
To ignite the burners, press the control and rotate anticlockwise to the required position.
5.2.1.3 Turing the burners off
•
Turn the M control to the position Pilot
5.2.1.4 Turning the pilot light off
•
Turn the M valve control to the Off position .
5.2.2

Gas fry-top with thermostatic valve

CONTROL M
, only the pilot will be lit.
M – Control M
1 – Ignition pipe
2 – Spark generation unit
and hold button down.
and hold button down.