Cardin RCQ504W00 Serie Manual Del Usuario página 17

Remarks
These instructions are aimed at professionally qualified "installers of electrical equipment" and must respect the local standards and regulations in force. The use and
installation of these appliances must rigorously respect the indications supplied by the manufacturer and the safety standards and regulations in force. This device complies
with Part 15 of the FCC rules, and its operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Attention! Only for EU customers - WEEE marking. This symbol indicates that once the products life-span has expired it must be disposed of separately from
other rubbish. The user is therefore obliged to either take the product to a suitable differential collection site for electronic and electrical goods or to send it back to
the manufacturer if the intention is to replace it with a new equivalent version of the same product. Suitable differential collection, environmental friendly treatment
and disposal contributes to avoiding negative effects on the ambient and consequently health as well as favouring the recycling of materials. Illicitly disposing of
this product by the owner is punishable by law and will be dealt with according to the laws and standards of the individual member nation.
Description
The interface is able to decode a radio frequency signal coming from a TXQ504-508 transmitter or via cable from a DKS250T, DKS250TL, DKSTPT or DKSDUALT
and output a Wiegand/ISO-3554 digital signal, containing the transmitter code, in 13 different formats.
It is fitted with a USB for connection to a PC and an input that can be connected to a timer or a switch with the aim of enabling or disabling the interface over different
time periods. Rolling Code management with transmitter memorization on the interface.
The multi-protocol interface RCQ504W00 - RCQ508W00 is factory set to work with the following appliances:
Wireless transmitters
Command systems via cable
TXQ504C2 TXQ508C2
TXQ504C4 TXQ508C4
TXQPRO504-4 TXQPRO508-4
TXQPRO504-4A TXQPRO508-4A
SSB-504 (433 MHz) SSB-508
DKS250T
DKS250TL
DKSTPT
DKSDUALT
2-channel precoded transmitters
4-channel precoded transmitter
4-channel precoded industrial transmitters
4-channel precoded industrial transmitters + aerial
Numerical code keypad via radio
Numerical code keypad via cable
Numerical code keypad via cable with backlighting
Transponder reader
Numerical code keypad with transponder function
17