Descargar Imprimir esta página

Maintenance Of The Appliance - ATI BT22 Serie Manual De Instrucciones

Barco de agua calentador doble standard calefacción: calefacción eléctrica y de calentamiento indirecto esmaltado

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 11
UK – pag. 4/4

11. MAINTENANCE OF THE APPLIANCE

To make the safe operation of the appliance and extend its life, a periodic check by a specialized technician is recommended
at least once a year.
Recommended actions during the periodic check:
seal the hydraulic connections
check that the safety valve has not loosened and check that it is not blocked by any limescale deposits
check the fastening (replace the fastening screws if they are worn)
efficiency of the electrical system and grounding and condition of the power supply cable (if damaged it must be
replaced by the manufacturer, authorized technical service or qualified personnel)
To protect the tank, to prevent corrosion, a sacrificial magnesium anode is used which must be replaced at least once a year,
otherwise the warranty will be void (FIG_11-1)
To clean the outer casing (2 - FIG_05-2) use only water and neutral soap. It is recommended to use a soft cloth taking care to
rinse and dry thoroughly. Products containing abrasive substances must not be used.
12. WARRANTY
The warranty conditions are valid provided that the installation instructions contained in this booklet are followed. The
warranty starts from the production date printed on the data label of the appliance and has a duration of 36 months. The
same decays if the sacrificial magnesium anode is not replaced annually. For safety reasons and for the validity of the
guarantee it is mandatory to use only original spare parts.
13. ACCESSORIES AVAILABLE ON REQUEST
ABMIX (FIG_13-1) :
allows you to set a constant hot water temperature (between 30 ° C and 65 ° C)
ABRGOM (FIG_13-2) : allows you to make hydraulic connections using rubber hoses, instead of threaded connections.
14. MAIN SPARE PARTS (FIG_14-1)
pos.
cod.
1
0-0570
mounting bracket
2
0-0571
fastening band
3
020-0052
resistance hood
4
100-0086
gasket
5
130-0057
drain cock
6
130-0081
male straight fitting - 1/2 x 14
7
130-0092
check / safety valve
8
130-0099
straight male fitting - 1/2 x 18
9
140-0001
PG cable gland 9
10
280-0014
electric resistance - 230 V - 550 W
10
280-0015
electric resistance - 230 V - 850 W
10
280-0016
electric resistance - 230 V - 1250 W
10
280-0037
electrical resistance - 120 V - 500 W
10
280-0039
electrical resistance - 120 V - 800 W
10
280-0034
electrical resistance - 120 V - 1200 W
11
280-0042
thermostat
12
900-0135
Alimentation cable
ATTENTION: FROST CAN CAUSE PERMANENT DAMAGE TO THE APPLIANCE.
IF THE APPLIANCE IS NOT USED DURING THE COLD SEASON, DRAIN THE APPLIANCE
COMPLETELY (USE THE DRAIN COCK D (FIG_08-1)
description
BTxx05
BTxx08
BTxx12
2
2
2
2
2
2
1
1
1
1
1
1
1
1
1
2
2
2
1
1
1
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
2-210-0335_libretto_BT_2021-10_testo_GB.docx
ENGLISH
BTxx051
BTxx081
BTxx121
2
2
2
2
1
1
1
1
1
1
2
2
1
1
2
2
1
1
1
1
1
1
1
1
2
2
1
1
1
2
1
2
1
1
1
1

Publicidad

loading