UK – pag. 1/4
The BT range of water heaters.... it includes 30 different models available with the following features to satisfy every
installation and use requirement
a) 5 storage capacities (22 - 30 - 45 - 60 - 80 liters / 6 - 8 - 11 - 15 - 21 gallons)
b) 3 powers (500/550 w - 800/850 w - 1200/1250 w)
c) 2 power supplies (120 V - 230 V)
1. GENERAL PRECAUTIONS
The following instructions are important to ensure the safe installation, use and maintenance of the appliance.
•
This booklet is an integral and essential part of the water heater: therefore it must be kept at hand for any further
consultation.
•
The water heater has been produced for the production of hot water: any other type of use is to be considered dangerous
and unsuitable.
•
The appliance must not be installed in humid environments, bathtubs, washbasins, showers, swimming pools, etc. and
must be protected from splashes of water, jets of water or other liquids, in order to avoid short circuits of electrical devices.
•
The installation must be carried out by a qualified person who is responsible for the application of the safety regulations in
force. Improper installation, caused by failure to comply with the manufacturer's instructions, can cause injury to people,
animals or damage to other equipment for which the manufacturer declines all responsibility.
•
Before connecting the water heater, make sure that the electrical characteristics printed on the data plate correspond to
those of the electrical network.
•
If the water heater is installed in a bathroom, in a damp room or near water, take care of the safety distances provided for
by the CEI-EEC regulations. Also, switches or any other electrical controls must not be reachable by anyone taking a
shower or using the bathtub. Do not touch the appliance with wet or damp hands.
•
Do not allow use by children or incapable people without any supervision.
•
Packaging parts (plastic bags, polystyrene, clips, etc.) must be kept away from children, as they can be dangerous.
•
Read this booklet carefully as it provides useful instructions on safety, installation, use and maintenance.
•
If the appliance is sold or transferred to another owner, make sure that this manual accompanies the appliance, so that the
new owner and / or the installer can consult it.
•
To avoid the risk of damage due to frost, if the appliance is not used for a long period and is installed in an unheated room,
it is recommended to empty it completely. The manufacturer is not responsible for any damage or breakages due to frost
or water leaks from the system.
•
For best water heating performance and for warranty purposes, strictly adhere to the instructions below.
2. TECHNICAL FEATURES
supply
V ~
electric
TO
power
w
supply
V ~
electric
TO
power
w
capacity
lt (gal)
Max pressure
kPa (psi)
empty weight
kg (lb)
3. PACKAGING CONTENTS
The device is packaged and delivered in a cardboard box with adequate protection. In addition to the appliance, inside the
box there are:
a) the installation manual
b)
fixing brackets and bands (including fixing screws)
c) the check / safety valve
230
230
230
230
2.2
3.5
5.2
2.2
500
800
1,200
500
120
120
120
120
4.2
6.7
10.0
4.2
500
800
1,200
500
22 (6)
30 (8)
700 (102)
700 (102)
14.0 (30)
16.0 (35)
230
230
230
230
3.5
5.2
2.2
3.5
800
1,200
500
800
1,200
120
120
120
120
6.7
10.0
4.2
6.7
800
1,200
500
800
1,200
45 (11)
700 (102)
18.8 (41)
2-210-0335_libretto_BT_2021-10_testo_GB.docx
ENGLISH
230
230
230
230
5.2
2.2
3.5
5.2
500
800
1,200
120
120
120
120
10.0
4.2
6.7
10.0
500
800
1,200
60 (15)
700 (102)
21.3 (47)
230
230
230
2.2
3.5
5.2
500
800
1,200
120
120
120
4.2
6.7
10.0
500
800
1,200
80 (21)
700 (102)
26.0 (57)