Finding New Stations - Dab; Signal Strength Display - Dab - Sangean DPR-99+ Manual De Instrucciones

Finding new stations - DAB

As time passes new stations may become available. To find new
stations proceed as follows:-
1. Press and release the Auto Tune button, the display will show
"Scanning". Your radio will perform a scan of the DAB III frequencies.
As new stations are found the station counter on the right-hand side
of the display will increase and stations will be added to the list.

Signal strength display - DAB

1. Repeatedly press and release the Info button until the display shows
the signal strength.
2. Position your radio and carefully angle the telescopic aerial for
best reception using the signal strength display as a guide. Move
your radio around and position it so as to give maximum number of
black rectangles on the signal strength display. The clear unfilled
rectangle indicates the minimum signal level required for satisfactory
reception.
3. Press the Info button to exit the signal strength display.
9