Publicidad
Idiomas disponibles
Idiomas disponibles
•
Advance blades into the material without forced effort or unnecessary pressure.
A little practice will enable you to determine what forward pressure gives you the
smoothest cutting.
Proper Hand Position (Fig. G)
WARNING: To reduce the risk of serious personal injury, ALWAYS use proper hand position
as shown.
WARNING: To reduce the risk of serious personal injury, ALWAYS hold securely in
anticipation of a sudden reaction.
Proper hand position requires one hand on the main handle.
MAINTENANCE
WARNING: To reduce the risk of serious personal injury, turn unit off, allow
motor to stop, and keep away from power switch before making any
adjustments or removing/installing attachments or accessories. An accidental
start‑up can cause injury.
Your BLACK+DECKER power tool has been designed to operate over a long period of time
with a minimum of maintenance. Continuous satisfactory operation depends upon proper
tool care and regular cleaning.
Cleaning
WARNING: Blow dirt and dust out of all air vents with clean, dry air at least once
a week. To minimize the risk of eye injury, always wear ANSI Z87.1 approved eye
protection when performing this procedure.
WARNING: Never use solvents or other harsh chemicals for cleaning the non‑metallic
parts of the tool. These chemicals may weaken the plastic materials used in these parts.
Use a cloth dampened only with water and mild soap. Never let any liquid get inside the
tool; never immerse any part of the tool into a liquid.
Accessories
WARNING: Since accessories, other than those offered by BLACK+DECKER, have not
been tested with this product, use of such accessories with this tool could be hazardous.
To reduce the risk of injury, only BLACK+DECKER recommended accessories should be
used with this product.
Recommended accessories for use with your tool are available at extra cost from your local
dealer or authorized service center. If you need assistance in locating any accessory, please
contact BLACK+DECKER call 1‑800‑544‑6986.
BCSCOFF: Replacement O Blades (fabric, paper)
BCSCDFF: Replacement D Blade (cardboard, metal)
English
13
Publicidad
