Publicidad
Idiomas disponibles
Idiomas disponibles
rePlaCinG tHe ProPeller
replacing the propeller
You can replace the original propeller on your Crash FX if the original one becomes
damaged or is lost . One spare propeller is included in the Crash FX package .
NOTE: Adult supervision is required when changing the propellers .
To replace the damaged propeller, follow the instructions below:
1 .
Make sure the remote controller and Crash FX are turned off .
2 .
Using a pair of pliers (not supplied), carefully grasp the propeller and pull it off
the axle as indicated .
3 .
Insert the new propeller into the axle gently
and carefully, making sure it is secure .
Be careful not to damage the motor .
4 .
Test the propeller by turning it manually
to make sure it does not touch the propeller guard .
storage
When you have finished playing with Crash FX you should store it safely with the
remote controller .
IMPORTANT: Always recharge Crash FX before storing it . Severe battery depletion
may result in permanent battery failure .
8
Publicidad
