Bellman & Symfon BE1431 Manual De Instrucciones página 76

Testing the signal
Using the test buttons
1 Press both test buttons
simultaneously on the transmitter.
The top LED lights up in green to
show that a radio signal is being
transmitted.
2 The yellow Visit LED on the
receiver lights up to show that the
signal was received. In addition,
it starts to sound, flash or vibrate
depending on the receiver.
Note: If you have changed the
signal pattern, it will react in
accordance with the table on the
following spread.
150
1
2
Testing the signal
Using a mobile phone
1 Use for instance a mobile phone to
call the landline telephone. The top
LED on the transmitter lights up in
green to show that an incoming
call is detected.
2 The yellow Visit LED on the receiver
lights up to show that the radio
signal was received. In addition,
it starts to sound, flash or vibrate
depending on the receiver.
Note: If you have changed the
signal pattern, it will react in
accordance with the table on the
following spread.
1
2
151
App