Publicidad
Idiomas disponibles
Idiomas disponibles
5.3 Rotational speed setting
Use the following procedure to select the
rotational speed:
1.
Select the desired level at the setting wheel
(9).
At the setting wheel (9), you can adjust
➢
the saw blade speed continuously
between 1400 and 1700 rpm.
The rotational speed is set.
✓
The table below shows the saw blade speed settings that are suitable for your application:
Material
Plastic material (styrofoam)
Plastic material (styrofoam)
Wood fiber insulation material
Hardwood, softwood, laminated wood, coated panel material
Hardwood, softwood, laminated wood, coated panel material
Hardwood, softwood, laminated wood, coated panel material, soft fiber
5.4 Switching off
Use the following procedure to switch off the
machine:
1.
Release the operating lever (8).
The integrated automatic brake limits the
➢
coasting time of the saw blade to approx.
5 seconds.
The switch-on lock is activated
➢
automatically and secures the hand-held
circular saw against being switched on
inadvertently.
The machine is switched off.
✓
20
Fig. 14: Selecting the rotational speed at the setting wheel
Level
1
2
3
4
5
6
Fig. 15: Switching the machine off
MKS185Ec
Rotational speed
rpm
1400
1500
1550
1600
1650
1700
01/2022
Publicidad
