Wall-Mount The Vb-S - Bose VIDEOBAR VB-S Manual De Instrucciones

Wall‑mount the VB‑S
For best performance, follow these recommendations when setting up the
VB‑S on a wall:
See General Mounting Guidelines (Page 14) first.
When determining where to attach the wall‑mount bracket to the wall,
make sure there is enough space around the bracket to fit the VB‑S:
There must be at least 3.8 cm (1.5 in) above the wall‑mount bracket.
This will allow you to "hang" the VB‑S on it (Step 6) and to adjust the
angle of the VB‑S. It will also provide enough space to access the rear‑
panel connections on the VB‑S.
There must be at least 11.4 cm (4.5 in) below the wall‑mount bracket.
This will allow you to hang the VB‑S vertically during installation to
insert cables and to adjust the angle of the VB‑S.
The space must be at least 31.8 cm (12.5 in) wide with the wall‑mount
bracket in the center of it. This is necessary to accommodate the VB‑S
plus space to access the acoustic port on the sides of the VB‑S (there
should be 2.5 cm (1.0 in) on each side).
Only use the included hardware to wall‑mount this product.
Note: Some additional tools are required.
Note: Read the included Important Safety Instructions before
continuing.
SETU P
1 6 E N