Publicidad
Idiomas disponibles
Idiomas disponibles
LS103Ec
6.
Using the 4-mm [0.16-in] Allen key attached to
the machine, turn the countersunk screw (14)
in the gearbox shaft counterclockwise, and
remove the countersunk screw (14).
7.
Remove sprocket wheel, cutting chain and
guide rail together.
Replace the corresponding parts.
➢
8.
Mount the cutting chain together with the
sprocket wheel and the guide rail.
Ensure that the cutting teeth of the
➢
cutting chain run in the working direction
(see arrows on the chain guard (12)).
9.
Using the 4-mm [0.16-in] Allen key attached to
the machine, turn the countersunk screw (14)
in the gearbox shaft counterclockwise, and
tighten the countersunk screw (14).
10. Using the 8-mm [0.32-in] Allen key attached to
the machine, turn the fillister head screw (13)
clockwise to tighten it lightly.
11. Using the 4-mm [0.16-in] Allen key, tighten the
chain cutter at the threaded pin (11).
The correct chain tension is reached
➢
when the cutting chain can be lifted by
approximately 6 mm [0.24 in] at the
middle of the guide rail.
12. Using the 8-mm [0.32-in] Allen key attached to
the machine, turn the fillister head screw (13)
clockwise to tighten it at the end of the
adjustment work.
13. Mount the chain guard (12) and tighten the
two knurled screws (3).
Cutting chain assembly mounted /
✓
changed.
02/2022
Fig. 6: Installing and removing sprocket wheel, cutting
chain and guide rail
Fig. 7: Tensioning the cutting chain
Fig. 8: Mounting the chain guard
13
Publicidad
