Warning Signals; Service And Maintenance - Festool CTC SYS I Manual De Instrucciones

English
► Press the connection button on the remote
control [1-16] until the LED indicator [1-17]
flashes blue.
The remote control is ready for connection for
60 seconds.

14 Warning signals

Warning Description of warning signal
signal
Visual LED [1-12] Flashes green
Acoustic Signal

15 Service and maintenance

WARNING
Risk of injury, electric shock
► Always remove the battery pack from the
cordless mobile dust extractor before per­
forming any maintenance or service work.
► All maintenance and repair work which re­
quires the motor housing to be opened
should always be carried out by an author­
ised service workshop.
CAUTION
Certain cleaning agents and solvents are
harmful to plastic parts.
► Some of these include, but are not limited
to: Gasoline, Acetone, Methyl Ethyl Ketone
(MEK), Carbonyl Chloride, cleaning solu­
tions containing Chlorine, Ammonia, and
household cleaners containing Ammonia.
16
Flashes red
Lights up red
Increasing, begin­
ning with two short
► Follow the instructions provided in the
Festool Work App to authorise the secure
connection.
Cause Action
Battery pack emp­ Charge the battery pack.
ty.
Incorrect battery Use correct battery pack (see sec­
pack. tion 5).
Battery pack un­ Operating temperature, see bat­
dercooling. tery pack operating manual.
Battery pack faulty. – Change the battery pack.
– Use the charger to check that the
battery pack is fully functional
once it has cooled down.
Cordless mobile See section 11.3.
dust extractor
overheating.
Battery pack over­ Leave the battery pack to cool for
heating. approx. 10 minutes.
Battery pack – Charge the battery pack.
charge low.
– Use the newly charged battery
pack.
Customer service and repairs must
only be carried out by the manufac­
turer or service workshops. Find the
nearest address at:
www.festoolusa.com/service
Always use original Festool spare
EKAT
4
parts. Order no. at:
www.festoolusa.com/service
5
3
2
1
Observe the following information:
– Dust-related inspection (e.g. for filter dam­
age, tightness of the machine and function
of the control devices) by the manufacturer
or an instructed person at least once a
year.
– Dispose of components that cannot be
cleaned. Use impermeable bags to do so.
Observe the applicable disposal provisions!
– Keep the contacts on the cordless mobile
dust extractor, charger and battery pack
clean.