Technical Data; Ec Declaration Of Conformity; Machinery Directive - BTI BH 7-45 KOFFER Traducido De Las Instrucciones Originales

HEAVY-DUTY ROTARY HAMMERDRILL
BH 7-45 KOFFER
Congratulations!
You have chosen a BTI tool. Years of experience, thorough
product development and innovation make BTI one of the most
reliable partners for professional power tool users.

Technical Data

Voltage
(U.K. & Ireland only)
Type
No-load speed
No-load beats per minute
Power input
Single impact energy (EPTA 05/2009)
Optimum drilling range into concrete
Maximum drilling range in concrete
Maximum core drilling range in
concrete
Tool holdler
Weight
Noise values and/or vibration values (triax vector sum)
according to EN60745-2-6:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound level)
Drilling
Vibration emission value a
Uncertainty K =
Chiselling
Vibration emission value a
Uncertainty K =
* Measured at the side handle. Side handle vibration is higher
than vibration at the main handle.
The vibration and/or noise emission level given in this
information sheet has been measured in accordance with
a standardised test given in EN60745 and may be used to
compare one tool with another. It may be used for a preliminary
assessment of exposure.
BH 7-45
V
AC
V 230/115
AC
min 190–380
-1
bpm 1450–2900
W
J
mm 16–32
mm
mm
SDS MAX
kg
dB(A)
dB(A)
dB(A)
= m/s 8.9*
2
h, HD
m/s 1.5
2
= m/s 9.0*
2
h,Cheq
m/s 1.5
2
WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool.
However if the tool is used for different applications,
with different accessories or poorly maintained, the
vibration and/or noise emission may differ. This may
significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration and/
or noise should also take into account the times when
230
the tool is switched off or when it is running but not
actually doing the job. This may significantly reduce the
exposure level over the total working period.
1
Identify additional safety measures to protect the
operator from the effects of vibration and/or noise
such as: maintain the tool and the accessories, keep the
1350
hands warm (relevant for vibration), organisation of
10.5 work patterns.
EC-Declaration of Conformity
45

Machinery Directive

125
7.8
Heavy-Duty Rotary Hammerdrill
BH 7-45 KOFFER
BTI declares that these products described under Technical
Data are in compliance with:
93
2006/42/EC, EN60745-1:2009+A11:2010, EN60745-2-6:2010.
104
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact BTI at the
3
following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of BTI.
Michael Nagel
Managing Director
BTI Befestigungstechnik
GmbH & Co. KG,
Salzstraße 51, 74653 Ingelfingen,
GERMANY 10.09.2021
WARNING: To reduce the risk of injury, read the
instruction manual.
English
ppa. Martin Mayer-Hagelstien
Director
Marketing & E-Commerce
19