Publicidad
Idiomas disponibles
Idiomas disponibles
English
WARNING: No connection is to be made to the earth
terminal.
Follow the fitting instructions supplied with good quality plugs.
Recommended fuse: 13 A.
Using an Extension Cable
If an extension cable is required, use an approved 3–core
extension cable suitable for the power input of this tool (see
Technical Data).The minimum conductor size is 1.5 mm
maximum length is 30 m.
When using a cable reel, always unwind the cable completely.
Package Contents
The package contains:
1
Rotary hammerdrill
1
Side handle
1
Kit box
1
Instruction manual
•
Check for damage to the tool, parts or accessories which
may have occurred during transport.
•
Take the time to thoroughly read and understand this
manual prior to operation.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Wear ear protection.
Wear eye protection.
Date Code Position (Fig. A)
The date code qa, which also includes the year of manufacture,
is printed into the housing.
Example:
Year of Manufacture
Description (Fig. A)
WARNING: Never modify the power tool or any part
of it.
Damage or personal injury could result.
Trigger switch
1
Front Barrel (Collar)
2
Mode selector switch
3
Main handle
4
Bit holder
5
Locking sleeve
6
Lock-on switch
7
Electronic speed and
8
22
2019 XX XX
impact control dial
Red anti-rotation system
9
indicator LED
Yellow brushwear indicator
q;
LED
Date code
qa
Additional hand grip
qs
Steel ring
qd
Intended Use
Your heavy-duty rotary hammerdrill is designed for professional
masonry drilling and chiselling applications.
DO NOT use under wet conditions or in the presence of
flammable liquids or gases.
Your heavy-duty rotary hammerdrill is a professional power tool.
DO NOT let children come into contact with the tool.
Supervision is required when inexperienced operators use this
tool.
; the
2
Young children and the infirm. This appliance is not
•
intended for use by young children or infirm persons
without supervision.
•
This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for
their safety. Children should never be left alone with this
product.
Soft Start Feature
The soft start feature allows the tool to accelerate slowly, thus
preventing the drill bit from walking off the intended hole
position when starting.
The soft start feature also reduces the immediate torque
reaction transmitted to the gearing and the operator if the
hammer is started with the drill bit in an existing hole.
Vibration Control System
For best vibration control, hold the tool as described in Proper
Hand Position and apply just enough pressure so the damping
device on the main handle is approximately mid stroke.
The vibration control neutralises rebound vibration from the
hammer mechanism. Lowering hand and arm vibration, it
allows more comfortable use for longer periods of time and
extends the life of the unit.
The hammer only needs enough pressure to engage the
vibraton control. Applying too much pressure will not make
the tool drill or chip faster and active vibration control will not
engage.
Lock-On Switch (Fig. A)
Chipping mode only
The lock-on switch
use applications. To lock the tool on, depress the lock-on switch
while the tool is running. The tool will continue to run after the
switch is released. To unlock and turn off the tool, depress and
release the switch.
Electronic Speed and Impact Control (Fig. A)
The electronic speed and impact control allows the use of
smaller drill bits without the risk of bit breakage, hammerdrilling
into light and brittle materials without shattering and optimal
tool control for precise chiselling.
To set the electronic speed and impact control dial 8, turn the
dial to the desired level. The higher the number, the greater the
speed and impact energy. Dial settings make the tool extremely
flexible and adaptable for many different applications.
offers increased comfort in extended
7
Publicidad
