charging the battery
WARNING: When recharging the battery, use only the
detachable power unit supplied with the appliance.
1.
Assemble the charging base as shown in Figure 1 below.
2.
Insert the end of the mains charger power cord into the space indicated by an arrow
in Figure 2.
Fig. 1
3.
Pass the power cord through the notches under the base, then pass the cord
through the cable guide as shown in Figure 3.
4.
Place the charging base on a flat, stable surface and plug the power unit into an
easily accessible wall socket (Figure 4).
Fig. 2
Fig. 3
Fig. 4
15