Technical Data; Mounting; Maintenance And Care; Disassembly And Disposal - dormakaba MUTO Comfort Pocket L 80 Instrucciones De Montaje

dormakaba
3.2

Technical data

Max. passage height (mm):
Max. door panel width (mm):
Max. door panel height (mm):
Max. door panel weight (kg):
Glass thickness (mm):
4

Mounting

1-4
The track rail and the pocket profile must be installed
once the wall pocket is assembled. All other additional
parts can be installed after the wall pocket has been
installed.
3
Fix the track rail and the pocket profile vertically to a
load-bearing suspended supporting structure.
4
Disassemble the fixing brackets and finish the wall
pocket.
19
The trigger engages in the damper unit.
20
Allow the damper to retract as far as the stopper,
then push the panel with the damper unit into the
pocket as far as desired.
30
Apply a seal on the face side in the passage area on
site. In case of the door panel's disassembly, this must
be reversible.
5

Maintenance and care

See Maintenance manual for manual sliding doors
MUTO Comfort Pocket L 80
6
Disassembly is carried out in the reverse order of
mounting and must be carried out by qualified
2435
personnel.
1500
2600
80
electrotechnical parts and batteries in the designated
8-13.5
acceptance and collection points. Refer to the
statutory regulations for your country.
WN 059979 45532

Disassembly and disposal

The product must be disposed of in an
environmentally friendly manner.
Electrotechnical parts and batteries must not
be disposed of as domestic waste. Dispose of
2021-04 7