Publicidad
Idiomas disponibles
Idiomas disponibles
18
Switching off the Timer:
- select the cooking zone
- set the Timer to
Note: the function remains active if no other
key is pressed in the meantime.
• Filter saturation indicator
The hood indicates when filter maintenance
is needed:
- Grease filter: the LED (17) lights up
- Activated carbon odour filter: the LED (17)
flashes
Reset filter saturation
After filter maintenance (grease and/or
activated carbon), press and hold the key
(18): the LED (17) will turn off, resetting the
indicator.
Activation of activated carbon odour filter
saturation indicator
Note: This indicator is normally deactivated.
- switch on the extractor by pressing ON/
OFF(1)
- with the extraction motor and the cooking
zones off, press and hold (18)
using (8a)
- the LED (17) over the button will turn on,
then turn off, to indicate that it has been
activated.
Deactivation of activated carbon odour filter
saturation indicator
- repeat the operation described above for
activation;
- the LED (17) will flash, then turn off, to
indicate that it has been deactivated.
• Automatic mode
The hood will turn on at the most suitable
speed, adapting the extraction capacity to
the maximum cooking level used in the
cooking zone.
When the cooktop is switched off, the hood
adapts its extraction speed, gradually
decreasing it, in order to eliminate any
residual steam and odours.
Automatic mode activation:
Press (7) briefly: the LED (18) will light up to
indicate that the hood is working in this
mode.
ENGLISH
Publicidad
