Using the remote control:
1. Press "ON/OFF" button.
2. Press "UP SPEED" o "LOW SPEED" buttons to select the
desired speed, considering this fan has 24 speeds. The
display will show the selected speed.
3. Press the "SWING" button to allow oscillation from right to
left. Pressing again will stop the oscillation.
4. Setting the timer: press "TIMER" button as many times as
necessary to set the timer, considering 1 press 1H , 2 presses
2H up to 15 presses or 15 hours timer. The display will not
flash after 3 seconds, meaning that the timer setting is
complete and the fan will continue working until the
programmed operating hours are reached. The timer symbol
will light up.
5. "SLOW SPEED OR NIGHT MODE" function: When the fan is
running, press this button on the remote control and the
speed will change to speed 3.
6. "MEDIUM SPEED" function: When the fan is running, press
this button on the remote control and the speed will be set to
speed 15.
7. "HIGH SPEED" function: When the fan is running, press this
button on the remote control and the speed will be set to
speed 24.
25