Click 2 Setting - Weinmann CPAP 20e Descripción Del Aparato E Instrucciones De Manejo

4.2 CLICK 2 setting

Switching on the humidifier
1. Fill up the humidifier and set up as described in "3.2 Filling and connecting the CLICK 2"
on page 17.
2. Switch on the therapy unit.
Humidifier button
Setting the heating level
1. Make sure your therapy unit is switched on.
Humidifier button
Which is the best setting for you will depend on the room temperature and the air humid-
ity. The optimum setting will therefore vary depending on the time of year. Under normal
conditions heating level 3 is sufficient.
If the temperature is 23 °C and air humidity 70 %, a humidity of 100 % can be reached
with heating level 6 and a flow rate of 20 l/min.
If your airways are dry when you wake up, the heating level is too low. Select a higher
setting.
If condensation forms in the breathing hose during a night therapy session, the heating
level is too high. Choose a lower heating level.
3. Press the humidifier button
humidifier symbol
play (level 4 in this case) are shown in the display of the
therapy unit.
2. Press the humidifier button
until the number and the humidifier symbol
flash.
3. Release the humidifier button
4. Now select the heating level (1-6) using the on/off
switch (+) or the softstart button (-).
The displayed value is saved after 4 seconds.
of the therapy unit. The
and the humidification level dis-
for approx. 3 seconds
.
Operation
start to
21