Battery And Charging - Roborock S7 Pro Ultra Manual Del Usuario

Safety Information
This appliance is for use on a nominal 120-V circuit and has a grounding attachment plug that looks like the plug illustrated
in sketch A in Grounding methods. Make sure that the appliance is connected to an outlet having the same configuration as
the plug.
No adaptor should be used with this appliance.
GROUNDED OUTLET
GROUNDING PIN
AA200

Battery and Charging

• Keep the charging dock away from heat (such as radiators).
• Do not wipe the charging contacts with wet cloth or wet hands.
• Turn the robot off and use original packaging for shipment.
• If placing the robot into storage, charge it fully and turn it off before placing it in a cool dry place. Recharge it at least
every three months to prevent the battery over discharging.
• Do not use the product when the temperature is higher than 40°C (104°F) or lower than 4°C (39°F), or there is any liquid
or sticky substance on the floor.
International Symbols Explanation
– PROTECTIVE EARTH (Protective Ground) symbol [symbol IEC 60417-5019 (2009-02)]
Grounding methods
GROUNDED OUTLET BOX
(A)
ADAPTER
METAL SCREW
TAB FOR GROUNDING
(B) SCREW
04
(C)