Installation Environment; Installation Instructions - inbody 970 Manual De Usuario

B. Installation Environment
Check the environment before installing the InBody970. This device is suitable for indoor use.
If installing this device outdoors, the following requirements must be fulfilled.
Temperature
Relative humidity
Atmospheric pressure
C. Installation Instructions
1. Open the InBody970 packing box and remove the packaging pad. Take the InBody970 out of the packing box.
Caution
• When transporting the device, do not grab upper section (LCD) or hand electrode connection area.
• For repackaging InBody970 at a later time, the supplied packing materials must be kept. Other wastes should be disposed
according to relevant local laws and regulations.
• Be careful not to get your hands or feet caught by the packing box.
• Be careful for children not to enter the packing box.
• Do not put protective packaging vinyl on your face.
* Refer to the figure below when transporting InBody970.
10 ~ 40°C (50 ~ 104°F)
30 ~ 75% RH
70 ~ 106kPa
Packaging Pad
Box Cap
* Do not transport InBody970 by holding the head.
EN
Protective Packaging Vinyl
5