Publicidad
Idiomas disponibles
Idiomas disponibles
8. Now, go back and securely tighten all the bolts and screws. Make sure that all the parts are tight and
there are no gaps between the parts. This will help keep the unit square.
9. Using the pilot holes as a guide, unfold the Back Panel (G) and align the pre-drilled holes against the
upper long edge with the pilot holes on the Top Back Stretcher (E). Attach the Back Panel (G) in place
with 12mm Washer Head Screws (7) provided.
NOTE: We recommend attaching the back panel with Pan Head Screws at the corners first.
10. Ask for assistance to stand the unit upright.
11. Insert four Shelf Supports (8) into the holes at the desired height on the side panels. Make sure you
place the four shelf supports at the same level, so the shelf is not tilted. Tilt and rest the Adjustable
Shelves (F) onto the Shelf Supports (8) and secure it (F) into place with 12mm Flat Head Screws (6).
Assembly Instructions
7
E
G
C
G
A
B
10
The adhesive tape faces outward.
G
8
F
C
F
8
6
Publicidad
