EGO SNT2120AP Manual Del Operador página 19

3. Align the grooves in the battery
pack with the raised ribs in one
of the battery compartments, and
then insert the battery pack into the
compartment (Fig. 9).
4. Push the battery pack until you hear
a "click". The battery-release button
will spring up when the battery pack
is securely attached.
NOTICE:
Make sure that the latch in the
battery compartment(s) snaps into place
and that the battery pack(s) are secured
to the unit before starting operation.
5. Attach the other battery pack into
the other battery compartment in
the same way.
6. To detach the battery pack, depress the battery-release button to release the
battery pack, and then lift it out of the compartment (Fig. 10).
7. Close the battery compartment cover.
STARTING/STOPPING THE SNOW BLOWER
CAUTION:
switch.
WARNING:
thrown into your or others' eyes, which can damage eyes severely. Always wear safety
glasses while operating the snow blower or while performing any adjustments or
repairs on the snow blower.
WARNING:
from the snow blower when it is in use.
WARNING:
blower is turned off. Allow the auger to stop rotating before starting it again.
NOTICE:
Do not rapidly turn the snow blower off and on.
56V LITHIUM-ION CORDLESS SNOW BLOWER — SNT2120AP/SNT2120AP-FC
Do not attempt to override the operation of the safety button and bail
The operation of a snow blower can result in foreign objects being
Ensure that other people and pets remain at least 100" (30m) away
The auger will continue to rotate for a few seconds after the snow
Battery
9
Compartment
Cover
Battery
Compartment
10
2
1
Install Battery
Battery Release Button
Remove Battery
19